timer.h

Go to the documentation of this file.

/*                                             -*- mode:C++; fill-column:100 -*- 
  timer.h -  LPC2xxx-specific hardware access and configuration routines
  Copyright (C) 2009 The Regents of the University of New Mexico.  All rights reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
  USA

  $Id$
*/

#ifndef __TIMER_H 
#define __TIMER_H

#include "SFBConstants.h"

#define CCLK_72MHZ (72000000)
#define CCLK_60MHZ (60000000)

#define CCLK CCLK_72MHZ

/* 
 * For SFB@60MHz: CCLK = 60Mhz, PCLK = 1/4 CCLK, so Fpclk = 15MHz, Fpclk/15000==1KHz.
 * so 1ms = Fpclk/15000, less one for the extra cycle in the timer
 *
 * For SFB@72MHz: CCLK = 72Mhz, PCLK = 1/4 CCLK, so Fpclk = 18MHz, Fpclk/18000==1KHz.
 * so 1ms = Fpclk/18000, less one for the extra cycle in the timer
 *
 * For SFB@72MHz: CCLK = 72Mhz, PCLK = 1/4 CCLK, so Fpclk = 18MHz, Fpclk/18000==1KHz.
 * so 500us = Fpclk/9000, less one for the extra cycle in the timer
 * so 250us = Fpclk/4500, less one for the extra cycle in the timer
 *
 */
#define TIME_INTERVAL_1KHZ_AT_60MHZ (15000-1)

#define TIME_INTERVAL_1KHZ_AT_72MHZ (18000-1)
#define TIME_INTERVAL_2KHZ_AT_72MHZ (9000-1)
#define TIME_INTERVAL_3KHZ_AT_72MHZ (6000-1)
#define TIME_INTERVAL_4KHZ_AT_72MHZ (4500-1)

extern u32 initTimer0();
extern void reinitTimer0();
extern void enable_timer0();
extern void disable_timer0();
extern void reset_timer0();
#include "lpc/LPC23xx.h"

#define micros() ((volatile const u32) (T0TC))  

#define millis() ((volatile const u32) (timer_1msec_counter))
extern uv32 timer_1msec_counter;

extern u64 microseconds();

extern u32 milliseconds();

extern u32 seconds();
#endif /* end __TIMER_H */
/*****************************************************************************
**                            End Of File
******************************************************************************/